iFlight-Where dreams can fly

TAURUS X8 PRO MAX
Max Power, Max Thrill

New Masterpiece

Taurus X8 Pro Max

Combining outstanding performance, integrated design,
High payload capacity, and extended flight time,
Taurus X8 Pro Max provides a seamless flying and shooting experience,
Defining a new standard for flagship FPV cinelifter.

Intro Video
TAURUS X8 PRO MAX

Professional Flagship
FPV Cinelifter

Powerful Performance

Equipped with 8 3616 Cinelifter Motor + 11inch Propellers

High Payload Capacity

Up to 4.5kg Payload Capacity
Support Carrying Cinema Cameras
and Stabilizer

Dual-Battery Design

Dual 8S 11200mAh battery,
provides up to 15 minutes of
hover time without payload.

High Redundancy Power System

Equipped with 8 3616 Cinelifter Motor + 11inch Propellers power combo,
The Taurus X8 Pro Max only requires a minimum hover throttle of 29%,
and can reach up to 170 km/h flight speed with 3kg payload,
perfect for high-speed car chase scenes and cinematic shooting needs,
enhancing the thrill and immersion of every scene it captures.

170km/h

Maximum Speed with 3kg Load

6kg

Maximum Thrust of a Single Motor

11inch

Propeller Diameter

High Payload Capacity

Up to 4.5kg payload capacity, support carrying cinema cameras
and stabilizer for dual operator.

All-scenario Efficient
Operating System

The Taurus X8 Pro Max adopts dual 8S 5600mAh batteries, providing a total of 8S
11200mAh to achieve up to 15 minutes[1] flight time without payload, and 7 minutes flight
time with 3kg payload, significantly increase your creative time.

15min

Max flight time

(without load)

11200mAh

2× 8S 5600mAh 95C batteries

7min

3kg payload, 80km/h speed

The precise slot located on the back of the aircraft allows for quick battery replacement with just a press, ensuring it's stable and reliable.
Taurus X8 Pro Max features a foldable GPS mount at the rear that adapts to complex environments, allowing for multi-angle adjustment for quick satellite acquisition.
It comes with an aluminum carrying case and custom eva interior to keep your equipment organised and protected when transporting.
TAURUS X8 PRO MAX

Innovative
Integrated Design

Taurus X8 Pro Max is a revolutionary FPV cinelifter that takes professional filmmaking to
new heights. With its integrated design and aerodynamic low-drag structure, Taurus X8 Pro
Max features an efficient operational system and extended flight time, offering a
professional and stable flying equipment for filmmakers. Additionally, it provides sufficient
power to carry cinema cameras and gimbal stabilization for various shooting scenarios.

Integrated Molding Arm

Taurus X8 Pro Max utilizes molded carbon tube curved arms for a more integrated design. Round tube characteristics for stronger rigidity and lower wind resistance. Paired with a robust flight power system, it ensures exceptional control feedback and a refined operate experience.

Eliminate Arm Slack

The arm joints are constructed with a square design, with CNC connections to eliminate arm slack and avoid flight issues caused by resonance, guaranteeing a smooth flying experience

Black Box Analysis

* The values of the parameters listed on this page are all measured from IFLIGHT RF laboratory related data. In different external
environments, ways of use, and firmware versions, there may be varying degrees of differences in the results. Please refer to actual
experience for accuracy.

Continuing the classic Taurus low center of gravity design, it effectively lowers the flight center of gravity, ensuring excellent flight performance. The frame reserves ample space, supporting the installation of handheld gimbals and camera setups.
The wires and LED indicators are hidden integrated within the arms, giving the drone an industrial and minimalist appearance.The LED indicators enhance visibility during flight one the set, improving overall safety.
Strategic airflow side panels to keep your components cool and clean. Additionally, the O3 Air Unit features an aluminum heatsink and fan assembly installed atop it to prevent overheating, even in the most extreme desert conditions, instilling confidence in operation.
TAURUS X8 PRO MAX

High Integration Circuit
Electronic Systems

TAURUS X8 PRO MAX

Design Details

Landing Light

The bottom LED light guides takeoff and landing, helps with positioning during takeoff and landing, enhancing safety during flights.

*LED lights can be turned on/off with a button.

Full Coverage Design

The side plates made from lightweight materials to ensure it can fly in complex environments without being affected by sand and dust.

Silicon-Ball Damper System

Taurus X8 Pro Max silicon-ball damper system consists of multiple independent silicone-balls, effectively absorbing and buffering vibrations, keeps your footage smooth, even during high-speed chases.

Slot Maintenance

There's no need to disassemble the entire drone. It has reserved openings for flight controller and receiver maintenance, allowing for quick access to perform maintenance with just a few simple steps, saving time and effort.

TAURUS X8 PRO MAX

Find Your Best Cinelifter FPV

Taurus X8 Pro Max

Taurus X8 Pro

  • Wheelbase

    600mm

  • Prop

    11inch

  • Weight (Without Load)

    3830g

  • Max Speed

    170km/h

  • Max Payload

    4.5kg[2]

  • Max Hover Time (Without Load)

    13-15min

  • Max Cruising Time (With Load)

    5-7min[3]

  • Hover Throttle (Without Load)

    29-31%

  • Hover Throttle (With Load)

    34-36%[4]

  • Wheelbase

    450mm

  • Prop

    8inch

  • Weight (Without Load)

    2300g

  • Max Speed

    150km/h

  • Max Payload

    2.7kg

  • Max Hover Time (Without Load)

    8-10min

  • Max Cruising Time (With Load)

    2-4min

  • Hover Throttle (Without Load)

    31-33%

  • Hover Throttle (With Load)

    42-44%

  • FC

    BLITZ H7 Pro

    480MHz refresh rate

  • ESC

    BLITZ E80A *8[5]

  • Motor

    XING2 3616

  • Power Supply

    Industrial-grade
    integrated BEC module

  • Power Switch

    √ Power supply switch

    √ Camera gimbal power switch[6]

  • GPS

    BLITZ M10 GPS V2

  • Battery

    Fullsend 8S 5600mAh *2

  • Packaging

    Aluminum case[7]

  • FC

    BLITZ F7 PRO

    216MHz refresh rate

  • ESC

    BLITZ E80A *8

  • Motor

    XING2 3110

  • Power Supply

    Industrial-grade
    isolated BEC module

  • Power Switch

    Integrated power switch

    Integrated power switch

  • GPS

    BLITZ Mini M10 GPS V2

  • Battery

    8S 5600mAh

  • Packaging

    Cardboard case

Click and drag the image to view

3D Preview 丨

Taurus X8 Pro Max

4.5kg payload capacity 170 km/h loaded speed 15min flight time(without load) 29% takeoff throttle
$3099.00
Buy Now

[1] The data was obtained using Taurus X8 Pro Max in a test environment with a 3kg load during flight, and is for reference only. Different environments, locations, and flight modes will result in varying degrees of differences. Please rely on the actual flight experience.

[2] It is recommended to keep the mounted weight below 3.5kg for a better flight experience.

[3] The data was obtained using Taurus X8 Pro Max in a test environment with a 3kg load, flying at a constant speed of 80 km/h, and is for reference only. Different environments, locations, and flight modes will result in varying degrees of differences. Please rely on the actual flight experience.

[4] The data was obtained using Taurus X8 Pro Max in a test environment with a 2kg load during flight, and is for reference only. Different environments, locations, and flight modes will result in varying degrees of differences. Please rely on the actual flight experience.

[5] Taurus X8 Pro Max PDB board integrates 8 BLITZ E80A ESCs.

[6] Both the camera and gimbal have independent XT60 power supply ports that draw power from the aircraft battery, and they are controlled by a unified camera power switch.

[7] Taurus X8 Max comes with a standard aluminum case, can accommodate1 Taurus X8 Pro Max, 2 standard Fullsend 8S 5600mAh batteries, and 2 sets of 11-inch propellers.

×